SawStop CB31230 Manuel du propriétaire télécharger pdf (Page 69)

SawStop 10” Industrial Cabinet Saw 67

Overall saw dimensions: 44” w x 34” d x 34” h

69 1/4”w x 36 1/2” d x 34” h (w/ optional fence & 36” rails)

85 1/4” w x 36 1/2” d x 34” h (w/ optional fence & 52” rails)

Cabinet footprint: 20” w x 25” d

Cast iron table: 24” w x 30” d, 44” w x 30” d (w/ extension wings)

Extension wing: 10” w x 30” d

Extension table (optional): 24” w x 30” d (36” rails), 40” w x 30” d (52” rails)

Weights (may vary with motor): 530 lbs (table saw only)

635 lbs (w/ optional fence, 36” rails & table)

685 lbs (w/ optional fence, 52” rails & table)

Shipping weight (approx.): 675 lbs (table saw only)

Blade: 60-tooth, professional grade, 5/8” arbor

Blade diameter: 10”

Blade tilt: Left

Blade kerf: 3 mm

Blade plate thickness: 2 mm

Max. depth of cut, blade at 0º: 3 1/8”

Max. depth of cut, blade at 45º: 2 1/4”

Max. rip, right of blade: 52 1/2” (w/ optional 52” rails)

36 1/2” (w/ optional 36” rails)

Max. rip, left of blade: 12 1/2”

Dado diameter: 8” (requires a separate brake cartridge)

Dado max. width: 13/16”

Arbor diameter at blade: 5/8”

Main bearing size: 62 mm OD x 30 mm ID

Second bearing size: 52 mm OD x 25 mm ID

Table in front of blade (max. elevation): 11”

Table behind blade (max. elevation): 9 3/4”

Arbor Runout: 0.001” Maximum Allowable Runout

Blade Lateral Movement Over Full Elevation Range: 0.006” Maximum

Table Flatness Measured Diagonally: 0.010” Maximum Gap

Overall Table and Extension Wing Flatness: 0.025” Maximum Gap

Blade Alignment with Miter Slot: 0.010” Maximum displacement

Deviation of Miter Gauge Indexing Stops

from actual angle: ±0.25º

Alignment between Spreader and Blade: 0.010” Maximum difference

Miter slots: T-shaped, 3/4” at top, 1” at bottom, 3/8” deep

Dust collection port diameter: 4”

Riving knife / spreader thickness: 2 mm

Blade guard: polycarbonate, extends only 5/8” to right of blade

Standard Insert: zero clearance, phenolic core, melamine surfaces

Dado Insert: zero-clearance, phenolic core, melamine surfaces

Belts: 2 V-ribbed belts— arbor belt is static dissipative

Hand Wheels: 8” diameter, cast iron with chrome handle

Motor Options:

3 hp, 1 phase, 230V, 13A, 60 Hz, TEFC 5 hp, 3 phase, 600V, (Canada)

5 hp, 1 phase, 230V, 20.5A, 60 Hz, TEFC 7.5 hp, 3 phase, 600V (Canada)

5 hp, 3 phase, 230V, 13A, 60 Hz, TEFC 3 hp, 1 phase, 240V, 50 Hz (Australia)

5 hp, 3 phase, 480V, 7A, 60 Hz, TEFC 5 hp, 3 phase, 415V, 50 Hz (Australia)

7.5 hp, 3 phase, 230V, 19A, 60 Hz, TEFC

7.5 hp, 3 phase, 480V, 9A, 60 Hz, TEFC 3 hp, 3 phase, 230V, 8A, 60 Hz, TEFC (discontinued)

Cabinet Saw Specications

Cabinet Saw Manual 1st Reprint.i67 67 3/9/2010 8:33:10 AM

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

SawStop CB31230 Manuel du propriétaire Page 69

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires SawStop CB31230