SawStop CB31230 Manuel du propriétaire télécharger pdf (Page 8)

6 SawStop 10” Industrial Cabinet Saw

1. Read and understand the instruction manual and all safety warnings before operating this saw. Failure to follow

instructions or heed warnings may result in electric shock, re, serious personal injury or property damage.

Save these instructions and refer to them whenever necessary.

2. Some types of dust created by sawing, power sanding, grinding, drilling, and other construction activities

contain chemicals known to cause cancer, birth defects or other reproductive toxicity or harm. Some examples

of these chemicals are lead from lead-based paints, crystalline silica from bricks, cement, and other masonry

products, and arsenic and chromium from chemically treated lumber.

In addition, wood dust has been listed as a known human carcinogen by the U.S. government.

The risk from exposure to these chemicals and to dust varies depending on how often you do this type of work.

To reduce your exposure, work in a well ventilated area and work with approved safety equipment including

dust masks or respirators designed to lter out such dust and chemicals.

3. This saw must be connected to a grounded metal permanent wiring system or to a system having an equipment-

grounding conductor. In the event of a malfunction or breakdown, grounding provides a path of least resistance

for electric current to reduce the risk of electric shock.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock and/or

malfunction.

Check with a qualied electrician or service personnel if the grounding instructions are not completely

understood or if in doubt as to whether the tool is properly grounded.

4. Use only identical replacement parts when servicing the saw.

5. Keep guards in place and in working order.

6. Remove adjusting keys and wrenches from the saw before turning it on.

7. Keep the top of the saw clean and free from clutter. Cluttered areas invite accidents.

8. Do not use the saw in dangerous environments. For example, do not use the saw in damp or wet locations or

expose it to rain; and keep the work area well lighted.

9. Keep children away from the saw. Make the workshop kid-proof with padlocks, master switches, or by removing

starter keys.

Safety

A table saw is a dangerous tool and there are hazards inherent with using this saw. Some of these hazards

are discussed below. Use common sense when operating the saw and use the saw only as instructed. You are

responsible for your own safety!

WARNINGS

Cabinet Saw Manual 1st Reprint.i6 6 3/9/2010 8:32:39 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 103 104

Pas de commentaire

SawStop CB31230 Manuel du propriétaire Page 8